Intermediate Lightweight Sheet Piling
Shoreline Steel offers these intermediate lightweight steel materials available in ASTM-A-572 / GR.50 / ASTM-A-328 / Bare or Galvanized finish. All of the listed intermediate lightweight sheet pilings are fully manufactured in the USA. All the intermediate lightweight sheet piling can be cut to the length you need it. The intermediate lightweight sheet piling can be used to prevent erosion to protect shores.
Intermediate Lightweight Sheeting Cross Section
| Section Type | Thickness | Weight | Weight | Sec. Mod. | Moment of Inertia | Coating Area | |
|---|---|---|---|---|---|---|---|
| Nominal | Lb/Square Ft. | Lb/Lineal Ft. | Inch3(Ft.Wall) | Inch4(Ft.Wall) | Sq.Ft/LF | ||
| Per Pile | Per Ft. of Wall | ||||||
| SZ - 10 | .164 | 9.4 | 16.6 | 7.3 | 50.3 | 27.4 | 4.75 |
| SZ - 11 | .179 | 10.3 | 18.2 | 7.9 | 54.7 | 29.8 | 4.75 |
| SZ - 12 | .209 | 12.0 | 21.2 | 9.2 | 63.9 | 34.8 | 4.75 |
| SZ - 14 | .239 | 13.5 | 24.4 | 10.4 | 73.1 | 39.9 | 4.75 |
| SZ - 15 | .250 | 14.0 | 25.5 | 10.9 | 76.4 | 41.7 | 4.75 |
Bent Corners
- Corners Maybe Bent To Any Degree Up To 90 Degrees
- Outside Corners Available in all Zee Piling Sections
- Inside Corners Available in Light Zee, Intermediate Light Zee and Intermediate Heavy Zee
- Custom Capping, Tie Backs, Waling, Fabricated Corners, Tees and Slip Joints Are Available